WaterGuard Penetrative Sealer

Interior or Exterior Wall & Ceiling Sealer A single pack, quick drying, water based polyurethane penetrative sealer for sealing cement, concrete and other porous cementitious substrates. When to use WaterGuard Penetrative Sealer • Over Teracoat DecoSkim

• Over Teracoat Off Shutter

• Over WaterGuard All In One Pro • Over natural stone & porous tiles

• Over cement or concrete surfaces

• Over natural porous surfaces PREP & APPLY: 

1. Remove all loose material, any previous sealers or treatments, and wipe dust off with a lightly damp clean cloth.

2. Stir the product by hand and pour into a clean paint tray.

3. Spread at 5 to 10m² /litre depending on surface porosity. Cut in tight areas and corners with a good quality brush, then apply with a foam or Mohair roller.

4. Wash loose hair off the Mohair roller with fresh water and spin dry.

5. Re-coat after 2 hours when touch dry. Walls and ceilings require 2 coats and shower walls 3 coats.

6. Do NOT use on kitchen splash backs or surfaces that come in contact with oils/solvents. 

13.5cm (l) x 9.4cm (w) x 21.5cm (h) 3.5kg